|
 |
Textile & Yarn Testing |
|
| | | | | | | |
Bursting Strength Tester - Analogue Model |
|
 |
Bursting strength of any material such as fabric, leather, etc. is its strength under multi - directional force and is defined, as the hydrostatic pressure required producing rapture of the material when pressure is applied at a controlled increasing rate through a rubber diaphragm.
Technical Specifications: |
|
Display |
Analogue |
Opening in upper clamp |
30.5 mm diameter |
Opening in lower clamp |
38.1 mm diameter |
Rate of fluid displacement |
95 cc/minute |
Pressure range |
0 - 35 Kg / sq.cm |
Test fluid |
Glycerin |
Motor |
½ HP Single Phase |
Gear box |
Worm reduction type |
Power consumption |
½ kw |
|
|
Related Standards: |
- BS 3424/3137
- ASTM 3786
- ISO 2758/2559/3303/3689
|
|
|
|
|
Bursting Strength Tester - Digital |
Our Digital Bursting Strength Tester is highly accurate and gives high levels of repeatability and consistency in results.
It is an user friendly and it is ease of operation makes it a highly acceptable standard equipment. A highly recommended equipment for all quality conscious labs.
|
 |
|
Technical Specifications: |
Display |
|
Opening in upper clamp |
30.5 mm diameter |
Opening in lower clamp |
38.1 mm diameter |
Rate of fluid displacement |
95 cc/minute |
Pressure range |
0 - 35 Kg / sq.cm |
Test fluid |
Glycerin |
Motor |
½ HP Single Phase |
Gear box |
Worm reduction type |
Power consumption |
½ kw |
|
Related Standards: |
- BS 3424/3137
- ASTM 3786
- ISO 2758/2559/3303/3689
|
|
|
Wrap Reel - Hand Operated |
|
 |
Wrap Reel is suitable for making accurate lengths of yarn, in hank form, for subsequent weighing and determination of count and strength. A digital preset counter is provided in the unit to set the desired number of meters or yards. The Unit can be supplied with 1 meter or 54" Collapsible swift to assist operator for removal of reeled hanks.
The unit is fitted with automatic electromagnetic braking system, which arrests the swift in the correct position when the desired length of the yarn has been reeled.
|
|
|
Technical Specifications: |
Swift Perimeter |
1 ½ yards & 1 Meter |
Number of leas made at a time |
5 |
Spread of each lea |
20 mm |
Counter (Three Digits) |
DIGITAL AUTOMATIC with Sensor |
Packed Weight of Cone Std. |
30 KG |
|
Standards: |
- ISO 2060
- BS 2010
- ASTM D 1907
- DIN 53830
- IS-1671
|
|
|
|
|
Wrap Reel - Digital Model |
Digital Wrap Reel is an ideal equipment to produce Lea/Hanks of yarn for checking the yarn count and for lea strength Testing.
The top unit including wrap reel is mounted over a beautiful designed wooden base plate. One of the arms of the wheel can be locked to facilitate the removal of the leas from the wheel. It has a specially designed digital control panel with revolution setting option. The yarn guide device move through a distance of 20 mm once every sixteen turns to give leas of 20 mm width. Specially designed Bobbins stand can accommodate five bobbins unto 100 mm diameter and 250 mm length. The Bobbins stand is equipped with a yarn-tensioning device to facilitate in wrapping the yarn on the wheel. The standard wrap reel is suitable for making either Yardage or Metric leas. |
 |
|
Technical Specifications: |
Swift / Wheel Circumference |
1 ½ yards & 1 Meter |
Number of leas made at a time |
5 |
Spread of each lea |
20 mm |
Counter (Three Digits) |
Digital Pre-Set Counter with Sensor |
Operating Speed |
100 + 5 rpm |
|
Standards: |
ISO 2060 |
- BS 2010
- ASTM D 1907
- DIN 53830
- IS-1671
|
|
|