English Espano french deutsch italiano portuguese
Advance Search
Laboratory Equipments
Soil Testing Equipments
Petrolium Testing
Pharma Equipments
Food Processing
Analysis Instruments
Surveying Instruments
Chemistry Equipment
Biology EQuipment
Physics Equipment
General Equipment
Glass Ware
Plastcie Ware
Models And Charts
Textile & Yarn Testing
Plastic Testing
Paint Plating
Rubber Testing
Paper & Packaging

Textile & Yarn Testing
1  |  2  |  3  | 4  |  5  |  67 | 
Digital Tensile Strength Tester  
 Digital Tensile Strength Tester

Digital Tensile Strength Tester for Textiles is based on the Constant Rate of Traverse (CRT) principle. The sample is held between two jaws, the upper one is a stationary jaw while the other end is made to move at a known fixed speed with the help of Motor, Gear Box and Lead Screw arrangement (75mm or 300mm per minute). The load exerted on the Stationary jaw is sensed by a sensor connected with load cell which directly indicates the load in Digital form in kgs. The Elongation of the Test Specimen is measured on a Three Type of Tests can be operated on this unit.

  • Fabric Tensile Strength & Elongation of Fabrics.
  • Strength Testing of Lea/Hanks.
  • Seam Slippage Testing.

Technical Specifications
Capacity of the Tester 0 - 250Kg.
Sensitivity 100 Gm
Speed of Machine 75 mm per. Minute, 300 mm per. Minute
Minimum jaw separation 25 mm
Maximum jaw separation 1000 mm
Motor ¼ HP Single Phase 220 / 110 V AC Supply
Power Consumption 1KWb

Related Standards:

  • BS 1610
  • BSES 1002-3
  • ASTM E-4
  • DIN 5122/1
  Washometer II for AATCC Testing

The washometer is used for determining colour fastness of textile materials to washings. This is attained by mechanical agitating a specimen of textile in contact with pieces of specified adjacent fabrics in a soap-soda solution, before being rinsed and dried. The change in colour of the specimen and staining of the adjacent fabrics are assessed with standard grey scales.

Technical Specifications

Number of jars 8 Nos
Volume of each jar 8x1200 ml +100 ml
Distance of base of jars from the axis of Rotation 45 mm
Temperature of water bath Ambient to 98° C
Motor ¼ HP 230 V


 Washometer II for AATCC Testing

Hot Air Oven  
 Hot Air Oven

Digital Pilling Tester consists of two wooden cubical boxes with inside surfaces lined with special standard cork sheet and outside surfaces beautifully laminated. These boxes are rotated about their central axis at a specified speed with the help of a geared motor. A Pre-set Digital Counter stops the motor automatically after the desired number of revolutions.

Universal Memmert Type-Digital Model
Size 18" x 18" x 18" inside.
Maximum Temperature Range Ambient - 250°C
Least Count 0.1°C
Controlling Digital Temperature Controller cum Indicator

Related Standards:

  • BS 5811
  • IS 10971
  • IWSTM 152

The test for determining the resistance of the color of Textiles of all kinds and in all forms to the action of Human perspiration.

Color Fastness of Dyed or printed fabrics, against perspiration, is determined by exposing the fabric sample to the action of both alkaline and acidic reagents, while in contact with undyed adjacent fabrics on both sides.

Note : Perspirometer can also be used for Testin Color Fastness against sea water & Water.

Technical Details:
Load on the Test Specimen 5 Kg. ISO
Size of Test Specimen 100 mm x 40 mm
Size of Acrylic Separator Plates 115 mm x 60 mm
Number of Separator Plates 2 Set (Set of 21)

Single Yarn Breaking Tester  
  Single Yarn Breaking Tester

Model - SYB 240

It is a motorised unit with microprocessor based digital load display. Complete with over travel protection facility

Capacities available:

  • 5 Kgf.
  • 10 Kgf.
  • 20 Kgf.
  Color Matching Cabinet (Spectrum ASIA)

Specturm ASIA provides standardised and controlled environment for visual assessment of colors. It is suitable for all applications where there is a need to maintain Color consistency and Quality.

It allows a person to evaluate Color Samples under different Light Sources:
  • Artificial Daylight (D-65)
  • Cool White Light (CWF)
  • Tungsten Filament Light (Domestic Light Matching)
  • Ultra Violet Black Light (Whites & Fluorescent Dyes)
  • TL-84 Light -Triphosphor fluorescent Light (Point of Sale)

The use of Multiple Light Sources is the only way to detect
Metamerism - a phenomenon where samples appear to match under one Light source but are distinctly different under another.

SPECTRUM II is a universally preferred choice for Faster, Closer and Accurate Color Matching.

 Color Matching Cabinet (Spectrum ASIA)
Color Temperature
D-65 Light 6500° K
CWF Light 4100 K
TL-84 Light 4000 K
T.F. Light 2300-2800K
U.V.B. Light Ultra Violet
Technical Specifications:

Light sources
Artificial Daylight Fluorescent Lamps (D-65) 02 Nos. (18 w)
Tungsten Filament Lamps (Inc A Lamps) 04 Nos.(40W Each)
Cool White Fluorescent Lamp (CWF) 01 No. (18 W)
Triphosphor Fluorescent Lamp (TL-84) Point of Scale 01 No. (18 W)
Ultra-Violet Black Lamp 01 No. (18 W)
Voltage 220 / 110 V AC , 50/ 60 Hz.
Power consumption 1/4 kw

@Copyright electrostic gmbh