Redwood Viscometer, Flash Point Apparatus

 
English Espano french deutsch italiano portuguese

 

SEARCH
Advance Search
TELL A FRIEND
 
   
      PRODUCTS
Laboratory Equipments
Soil Testing Equipments
Petrolium Testing
Equipments
Pharma Equipments
Food Processing
Analysis Instruments
Surveying Instruments
Chemistry Equipment
Biology EQuipment
Physics Equipment
General Equipment
Glass Ware
Plastcie Ware
Microscope
Models And Charts
Textile & Yarn Testing
Plastic Testing
Paint Plating
Rubber Testing
Paper & Packaging
  

Petrolium Testing Equipments
 
Redwood Viscometers  
 Redwood Viscometers
These viscometers are designed for viscosity tests of petroleum Products. They confirm to requirements of IP 70. Two adaption of Red Wood viscometer are available No. II for liquids whose flow time exceeds 2000 seconds. The complete out fit comprises hammer finshed Stainless steel bath with electrical heating arragnent suitable to operate at 220 Volts AC mains with tap silver plated oil cup with precision stainless steel jet, cup cover ball valve, thermometer- clip. Stirrer and M.S. Sheet stand with levelling screws.
   
Top
  TAR Viscometer Multiple Apparatus.

Consist 6 cups in a S.S. Water Bath mounted on Stand with levelling feet & notched Strip for locating graduated cylinders. Fitted with 1000 watts immersion heater. Temperature is controlled by precision thermostate with F.H.P electric motor Stirrer.

Supplied with Six Tar Cups either 10mm or 4 mm orifice with Valves. Please specify size of cups and valves required. ( With Glass Receivers).


 TAR Viscometer Multiple Apparatus.
   

Top
Engler Viscometer Apparatus  
 Engler Viscometer Apparatus

As per IP 212 and ASTMD-490. Used for determining the Viscosity of lubricating and fuel oils.

It Consists S.S. Water Bath having Oil Cup with lid. The water Bath Stirring device mounted on stand. A Thermometer clip to the Water Bath and the Oil Cup lid has a thermometer socket. The bath is fitted with 500 watts Heater. It is Supplied with wooden or ebonite valve to fit jet. ( Without glass wares) Suitable to operater on 220 volts AC mains



 
Top
  Saybolt Viscometer Apparatus

Made as per ASTMD-88 specifications with Universal and Furol jets made of Stainless Steel Stirring is done by hand with turn table arrangement ( without Strainer, withdrawl Tube and glass wares) Suitable to operate on 220 Volts AC mains.

 Saybolt Viscometer Apparatus
   

Top
Abels Flash Point Apparatus  
 Abels Flash Point Apparatus

This apparatus is suitable for determining the close cup flash point of petroleum and mixtures according to IP 33 and IP 170 and also IS 1448 (Part 1) 1985(P:20). It is suitable for oils whose flashes below 70degreeC. It is supplied with oil cup, cover fitted with stirrer, thermometer socket S.S. Water Bath, Stand. An electric heater is fitted at bottom for operation on 220 Volts AC Circuits.

   
Top
  Flash Point Apparatus
This apparatus is made as per IP 34, ASTMD-93-58 T and IS 1448 (Part 1) 1270 (P.21) and 1203-1953 method B. The apparatus consists of brass test cup with handely removable cup cover with spring operated rotating Shutter having piolet jet, stirrer with flexible shaft. The Assembly rests in Air Bath which is covered with Dome shape metal top. The cup is fitted with insulated Handle and locking arrangement near Cup flange. The assemble is kept on round shape electric heater with temp. regulator. Suitable for operation on 220 Volts 50 cycles AC Circuits.
 Flash Point Apparatus
   

Top

Flash Point & Fire Point Apparatus

 
 Flash Point & Fire Point Apparatus
This apparatus is used for determination of flash point and fire point of petroleum products except fuel Oil with cup flash below 80degreeC as per specification IP 36 and IS: 1448 (P: 69) 1969. The apparatus consists of a cup heating plate to spectific dimension thermometer clip and test flame attachment with swivel joint for passing over test liquid surface in the prescribed manner, Heating is controlled by means of energy regulator fitted to the apparatus. Suitable for aperation on 220 Volts 50 cycles AC Circuits.

   
Top
  Softening Point Apparatus(Ring & Ball Apparatus)
For determination of softening point of bituminious materials according to IP 1206-1958. Softening point is that temperature at which the speciman under test becomes soft enough to allow a steel ball of specific dimension to fall a required distance under test condition. The apparatus consists of glass beaker, ring Stand two steel balls with ring and ball guides, hand Stirrer.

 Softening Point Apparatus(Ring & Ball Apparatus)

   

Top
Cloud And Pour Point Apparatus  
 Cloud And Pour Point Apparatus
This is made according to specification laid by IP 15& IS 1448 (P :10) 1970. The pour is lowest temperature at which the oil will just fail to flow. The apparatus Consists main cooling bath made out of S.S. sheet and stand unit with drain plug and cover has provision for fitting thermometer and a filling aperture for adding freezing mixture. A Glass jar for containing oils, jacket, disc and gasket as specified are also provided.
   
Top
  Drop Point Of Grease Apparatus

As per IP 31 the apparatus Consists of Brass Sleeve and case with metal cup and a glass Boiling tube with Cork fitted to a bath 600 ml beaker is provided. The assembly is kept on heater with energy Regulator control and stand with F.H.P. elect Stirrer. As per IP 132 the unit Comprises a glass beaker with fiber Cover together with glass test tube with three indentations to receive Chromium plated brass cup cork for tube and a 1.5 mm diameter Brass rod. The assembly is kept on heater with energy regulator and stand with F.H.P. motor stirrer.

BTI-OPT-024
   

Top
Kinematic Viscometer Bath(IP-71 AND IS 1448)  
No Images
This viscometer bath is used to maintain the correct constant Temperature for estimating kinemetic Viscosity of Oils & Petroleum product. In this type of bath Various Viscometers may be fixed as an internal part of bath. The bath is rectangular in shape. Inside tank made of Stainless steel sheet. On two sides toughned glass provided for full visibility of objects. The bath is controlled by an electronic relay and contct thermometer. Temperature range 5degreeC above room temperature to 100degreeC. Accuracy +-0.1degreeC Stirring is done by a F.H.P. elect. motor stirrer. It is Supplied with Viscometer tube holders and S.S. cover.

   
Top
  Flow Cup Viscometer

Flow cup viscometer as per IS 101 B-4 type complete with stand and leveling screws for adjustment.

BTI-OPT-024
   

Top
Carbon Residue Apparatus(Ramsbottom)  
 Carbon Residue Apparatus(Ramsbottom)
It is made as per IP 14, ASTM 524 and IS 1448 ( P:8)-1967 Standrads. It is used to determine the amount of carbon deposite when an oil evoparated under specified condition. The apparatus consists of a solid metal bath having 5 wells to accomodate cocking bulbs, The heavy duty heating elements provided around the bath. Supplied with 5 cocking bulbs and one syringe.

   
Top
  Carbon Residue Apparatus(Conradson)

It is made as per IP 13 ASTM D- 189 Specifications. It is useful to determine amount of Carbon Residue when an oil is eaporated under specified Conditions. The Carbon residue values of crude Oil residuam etc. These are useful in the manufacture of various lubricants. The apparatus con sists of spun sheet iron crucible 25 cc Capacity Sheet Iron hood and sheet iron block on a stand with triangular wire, and gas Burnor.

 Carbon Residue Apparatus(Conradson)
   

Top
Reid Test ApparatusVapour Pressure  
BTI-OPT-034
Made as per IP 69 & IS 1448 (P: 39). 1967 elect. Heated with FHP motor Stirrer and Contact thermometer and Relay (without Bomb. and accessories)

   
Top
  Copper Strip Corrosion Test Apparatus

Double walled stainless steel chamber bath outer chamber made of mild steel sheet attractive painted. As per IP 154 and IS 1448(P-15) to accommodate 6 Bombs. Temperature is controlled by Electronic Digital Temperature Controller (Without S.S. Bomb)

BTI-OPT-036
   

Top
Penetrometer Apparatus  
 Penetrometer Apparatus
This apparatus is used for penetration test on a wide variety of materials such as greases, petroleum, bitumen, tar,wax, polish, food stuff, rubber asphalts and pharmaceutical creams. A given force is applied over a given period of times and the depression is made in the sample which is measured in tenths of a millimeter and expressed as penetration. It consists of a head Support mounted on a vertical rod which can be adjusted for height. A rack and pinion and pointer assembly provides fine adjustment of needle tip tosample and in corporates a slipping clutch mechanism which make reading of penetration and subsequent resetting a sample and accurate operation. The dial graduate from 0-400 in one tenth millimeter sub Division. The Instrument is supplied with two sample containers.
   
Top
  Distillation Apparatus
(As Per IP 24, 132, And IS 1448 P: 8 Specifications)

This apparatus is used for determinations of distillation characterstics of petroleum products. The intrument consists of metal shield to support distillation flask with GEARED HEIGHT ADJUSTABLE DEVICE. It has a slot for vapour tube. A glass window is provided in front side for clear view of i nside objects. It also has cooling bath bath or condensor with M.S. black painted stand. Electrically heated.
The instrument is supplied with three square asbestos boards with 38 mm 50mm and 70mm holes. ( without glass wares)


 Distillation Apparatus
   

Top
Bomb Balorimeter Apparatus
(IP 12 Specifications)
 
 Bomb Balorimeter Apparatus
It is used for determination of heat of combustion, calorific value and Sulpher contents of solid and liquid fuels. The Bomb body and lid are machined from corrosion resisting Stainless steel rod Its capacity is appox. 300ml. It is provided with high pressure valuve and electrodes. The Calorimeter vessel water jacket Stirrer FHP motor driven are proivded as per IP Standards. The bomb calorimeter is supplied with firing unit Beckman thermometer, Pellet Press, ignition wire and pressure gauge on stand with copper pipe fitting magnifying glass.
   
Top
 
   
 
@Copyright electrostic gmbh